User’s Manual 7-8
HW Setup & BIOS Setup
USB
USB KB/Mouse Legacy Emulation
You can use this option to enable or disable USB keyboard/mouse legacy
emulation so that, even if your operating system does not support USB
devices, you can still use a standard USB mouse and keyboard - to achieve
this you should set the appropriate option(s) to Enabled.
USB-FDD Legacy Emulation
Use this option to enable or disable USB floppy diskette drive legacy
emulation. If your operating system does not support USB, you can still use
a USB floppy diskette drive by setting the USB-FDD Legacy Emulation
item to Enabled.
Button Setting
Button(s) when Display Closed
This tab allows you to specify the action of the power button, TOSHIBA
Assist button, and TOSHIBA Presentation button while the internal display
is closed.
Enabled Enables the USB KB/Mouse Legacy Emulation
function (Default).
Disabled Disables the USB KB/Mouse Legacy Emulation
function.
Enabled Enables the USB floppy diskette drive legacy
emulation function (Default).
Disabled Disables the USB floppy diskette drive legacy
emulation function.
Enabled When this option is selected, the power switch
always works normally regardless of whether the
display is closed or not. (Default)
Disabled for
battery use
When this option is selected, the power switch
does not work when the AC adaptor and power
cord are not connected and the display is closed.
Disabled When this option is selected, the power switch
does not work when the display is closed.
To Next Page
Loading...
