63
Getting Started
Using the TouchPad™
5.375 x 8.375 ver 2.3
The Control Panel window appears.
2 Click Printers and Other Hardware.
3 Click the Mouse icon.
4 Click the TouchPAD ON/OFF tab.
The TouchPAD ON/OFF tab view window appears.
Sample TouchPAD ON/OFF screen
5 Select Disable or Enable, whichever is appropriate.
6 Click Apply.
7 Click OK.
The Mouse Properties window closes.
8 Close the Printers and Other Hardware window.
9 Close the Control Panel window.
You can also use a hot key to disable or enable the TouchPad.
See “Disabling or enabling the TouchPad or Dual Mode Pad”
on page 241.
To Next Page
Loading...
Need help?
General