68
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
The Fn + F9 shortcut can be used to disable or enable the Dual
Mode Pad (see āDisabling or enabling the TouchPad or Dual
Mode Padā on page 241).
Using external display devices
Your computer comes with a built-in LCD display, but you
can also connect an external display device to the available
video port:
ā An external monitor or projector via the RGB (monitor) port.
ā A TV, VCR, or DVD recorder via the S-video (TV-out) port.
Before connecting an external monitor or video projector,
configure your computer for the type of device you are
connecting. To do this, refer to the documentation for your
operating system and devices.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitorās video cable to the RGB (monitor) port
on the left side of the computer.
2 Connect the deviceās power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Fn + F5, or by
configuring the Display Properties settings.
To Next Page
Loading...
Need help?
General