662 Troubleshooting Procedures
2.27 Sensor Button Troubleshooting
START
END
Sensor button connection
check (Procedure 1)
Logic Upper replacement
check (Procedure 2)
Replace system board
Figure 2-26 Sensor button troubleshooting process
To determine if the computer’s built-in Sensor button is functioning properly, perform the
following procedures. Figure 2-26 outlines the process. Start with Procedure 1 and continue
as instructed.
Procedure 1: Sensor button connection check
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
66
Procedure 2: Logic Upper replacement check
To Next Page
Loading...
