4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.20 LCD Bezel Assembly
Removing the LCD Bezel Assembly
Remove the LCD bezel assembly according to the following procedures and Figure 4.36.
1. Remove four rubber seals from the LCD bezel assembly.
2. Remove two M2.5x5 and two M2.5x6 screws and remove the LCD bezel assembly.
Figure
4
.
36 Removing the LCD Bezel Assembly
Installing the Display Mask
Install the LCD bezel assembly according to the following procedures.
1. Seat the LCD bezel assembly in the correct position.
2. Secure it to the display assembly with two M2.5x4 and two M2.5x6 screws.
3. Put four rubber seals over the screw holes.
Satellite A350 Maintenance Manual 4-50
To Next Page
Loading...
