4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.25 USB Board
Removing the USB Board
Remove the USB board according to the following procedures and Figure 4.45.
1. Remove one M2.5x4 screw that secures the USB board to the logic lower assembly.
2. Remove the USB board from the logic lower assembly.
Figure 4
.
45 Removing the USB Board
Installing the USB Board
Install the USB board according to the following procedures.
1. Seat the USB board in the correct position on the logic lower assembly.
2. Secure the USB board to the logic lower assembly with one M2.5x4 screw.
Satellite A350 Maintenance Manual 4-60
To Next Page
Loading...
