Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
2. Remove four M2.5x4 screws securing the display assembly to the laptop.
Figure 4
.
35 Removing the display assembly
3. Remove the display assembly.
Installing the Display Assembly
Install the display assembly according to the following procedures.
1. Place the display assembly in the correct position.
2. Secure the display assembly with four M2.5x4 screws.
3. Close the display panel and turn the laptop so the rear is facing you and secure two
M2.5x4 screws.
Satellite A350 Maintenance Manual 4-49
To Next Page
Loading...
