Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.10 Power Board
Removing the Power Board
Remove the power board according to the following procedures and Figure 4.19.
1. Remove one M2.5x4 screw from the power board.
2. Separate the power board from the logic upper assembly.
M2.5X4
Figure
4
.
19 Removing the power board
Installing the power switch board
Install the power switch according to the following procedures.
3. Seat the power board in the correct place on the logic upper assembly.
4. Secure the power board with one M2.5x4 screw.
Satellite A350 Maintenance Manual 4-29
To Next Page
Loading...
