Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.5 WLAN Card
Removing the WLAN Card
Remove the WLAN card according to the following procedures and Figure 4.8.
1. Detach the two antennas on the WLAN card.
2. Remove two M2.5x3 screws the secure the WLAN card.
3. Pull the WLAN card out at an angle.
M2.5X3＊2
Figure 4
.
8 Removing the WLAN card
Installing the WLAN Card
Install the WLAN card according to the following procedures.
1. Insert the WLAN card into the connector.
2. Press the card down and secure it with two M2.5x3 screws.
3. Attach the two antennas to the WLAN card.
Satellite A350 Maintenance Manual 4-17
To Next Page
Loading...
