Toshiba Satellite A350 - Figure 4.11 Removing the ODD Bay Module; Odd; Removing the ODD Bay Module

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.7 ODD
Removing the ODD Bay Module
NOTE: The installation and removal procedures are the same for all the modules that can be
installed in the ODD bay. See the appropriate sections for the disassembly procedures of
specific modules.
Remove the ODD bay module according to the following procedures and Figure 4.11.
M2.5X3
Figure 4 . 11 Removing the ODD Bay module
1. Turn the laptop upside down.
2. Remove one M2.5x3 screw.
3. Push the ODD bracket in the direction of the arrow.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
Satellite A350 Maintenance Manual 4-20