722 Troubleshooting Procedures
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
72
To determine if the computer’s TV port is functioning properly, perform the following
procedures. Figure 2-29 outlines the process. Start with Procedure 1 and continue as
instructed.
Procedure 1: TV connection check
Procedure 2: TV set check
Procedure 1 TV connection check
The TV cable may be damaged or the connections may be loose. Perform Check 1:
Check 1 Make sure TV cable is firmly plugged into both the TV set and the TV port of the
computer. If the cable is connected correctly, go to Check 2.
Check 2 The TV cable may be damaged. Replace with a good cable. If the malfunction
remains, go to Procedure 2.
Procedure 2 TV set check
The TV set may be faulty. Perform Check 1:
Check 1 Try using the set for TV reception. If it does not work, the set may be damaged. If
the set does work, perform Check 2.
Check 2 Try connecting a different TV to the computer. If the replacement TV works, the
original set may be damaged. If the replacement set does not work, the system
board may be damaged. Replace it with a new one following the instructions in
Chapter 4.
To Next Page
Loading...
