3.20 Fingerprint DOS Test 3. Tests and Diagnostics
Satellite M100/TECRA A6 Series Maintenance Manual 3-31
3.20 Fingerprint DOS Test
This test will check if the computer’s Fingerprint function is OK.
The subtests run step by step: (As below)
Step1. Need you swipe your finger to enroll.
Step2. Need you swipe your finger 2
nd
time to enroll.
Step3. Need you swipe your finger 3
rd
time to enroll.
Step4. The test program auto compare 1
st
,2
nd
and 3
rd
finger then to enroll.
NOTE: Execution of this test destroys fingerprint data
To Next Page
Loading...
