Toshiba Satellite M100 - Optical Drive Module; Optical Drive; Removing the Optical Drive Screw; Removing the Optical Drive Module

4 Replacement Procedures
4-18
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
4.7 Optical Drive Module
Removing the Optical Drive Module
To remove the optical drive module, you need to remove the expansion memory module cover
first as described in the previous section. Follow the steps below:
1. Turn the computer upside down.
2. Remove the battery and the expansion memory module cover.
3. Remove the black M2.5x4 screw securing the optical drive module.
Figure 4-16 Removing the optical drive screw
4. Use your hand to push the module bracket and then slide the module from the bay.
Figure 4-17 Removing the optical drive module