Toshiba Satellite M100 - Figure; Removing the Cable; Removing the Hexagonal Screws; Removing the System Board

4 Replacement Procedures
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
4-57
4.21 System Board
Removing the System Board
To remove the system board, first remove the display assembly, keyboard, and top cover, and
then follow the steps below:
1. Remove the DC connector from its socket.
Figure 4-64 Removing the cable
2. Remove the two hexagonal VGA screws from the system board.
Figure 4-65 Removing the hexagonal screws