4 Replacement Procedures
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
4-45
4.16 Top Cover
Removing the Cover
To remove the top cover, first remove the battery pack, HDD, expansion memory module, ODD,
modem, wireless LAN unit, keyboard, function button board, Bluetooth module, and display
assembly, as described in the preceding sections. Follow the steps below to remove the top cover.
1. Turn the computer upside down and remove the following 18 screws from the rear panel:
•
M2.5X6: seven screws
•
M2.5X8: six screws
•
M2.5x4: two screws from the HDD compartment
•
M2.5x16: three screws
Figure 4-49 Removing the top cover (back panel screws)
To Next Page
Loading...
