4 Replacement Procedures
4-46
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
2. Turn the computer over again and remove the following screws securing the top cover.
•
M2.5x8: two screws on the left side
•
M2.5X6: two screws
•
M2X4: one screw
Figure 4-50 Removing the top cover (front panel screws)
3. Detach two speaker cables, touch pad FPC cable, and finger print unit FPC cable from the top
cover.
Figure 4-51 Removing the cables
M2.5x8
M2x4
M2.5X6
To Next Page
Loading...
