Toshiba Satellite M100 - Figure; Removing the Fingerprint Module Bracket; Removing the Fingerprint Module Bracket Screws; Removing the Fingerprint Module

4 Replacement Procedures
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
4-51
4.18 Fingerprint Module
Removing the Fingerprint Module
To remove the Fingerprint Module, first remove the battery pack, keyboard, and top cover, and
then follow the steps below:
1. Remove two M2.5x2.5 screws securing the Fingerprint Module Bracket to the rear side of the
top cover.
Figure 4-56 Removing the fingerprint module bracket screws
2. Remove the bracket.
Figure 4-57 Removing the fingerprint module bracket