4 Replacement Procedures
4-62
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
4.23 Fan & CPU
Removing the Fan & CPU
To remove the Fan, Heat Sink, and CPU, you must first remove the display assembly, keyboard,
top cover and system board, and then follow the steps below:
1. Turn the system board upside down. Remove the four M2.0x4 screws from the heat sink.
Figure 4-70 Removing the heat sink screws
2. Lift and remove the heat sink from the system board.
Figure 4-71 Removing the heat sink
To Next Page
Loading...
