Toshiba Satellite M100 - Figure; Removing the USB Board Cable; Removing the USB Board Screws; Removing the USB Board

4 Replacement Procedures
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
4-55
4.20 USB Board
Removing the USB Board
To remove the speakers, first remove the battery pack, keyboard, and top cover, and then follow
the steps below:
1. Remove two M2.5x4 screws securing the USB board to the system board.
Figure 4-61 Removing the USB Board screws
2. Remove the USB board cable.
Figure 4-62 Removing the USB Board cable