Toshiba Satellite M100 - Figure; Removing the VGA Module; Removing the VGA Module Screws

4 Replacement Procedures
4-60
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
4.22 VGA Module
Removing the VGA Module
To remove the VGA module, you have to first remove the keyboard, top cover, and system board.
Then follow the steps below:
1. Turn the system board over and remove the M2.5x6 screw and M2.5x16 screws securing the
VGA module to the system board.
Figure 4-67 Removing the VGA module screws
2. Remove the VGA module from the system board.
Figure 4-68 Removing the VGA module