3. Tests and Diagnostics 3.7 Main Battery Change Test
3-12 satellite M100/TECRA A6 Series Maintenance Manual
3.7 Main Battery Charge Test
NOTE: The AC adaptor (75W, 15V) should be connected to successfully run this test.
This test shows and measures the main battery:
Battery type (Lion)
Manufacturer (Sanyo/Panasonic)
Remain charge capacity (0 ~ 100%)
Charge function (PASS/FAIL)
- “Battery Is Full” showed when “remain charge capacities” is 100%
The screen should display as below, indicating whether the test is passed or failed when finished.
To Next Page
Loading...
