4 Replacement Procedures
4-34
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
Installing the Expansion Memory Module
CAUTION: Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module, while referring to the illustrations on the previous
page:
1. Fit the module's connectors into the computer's connectors at about a 45-degree angle and
press the module carefully to ensure a firm connection.
2. Push the module down so it lies flat.
3. Place the shield cover about a 45-degree angle and push it down so it lies flat on the top of
the module.
4. Secure the shield cover with screws.
To Next Page
Loading...
