4 Replacement Procedures
4-74
[CONFIDENTIAL]
Satellite M100 Series Maintenance Manual
Installing the LCD Module
To install the LCD module, follow the steps below and refer to the figures in the preceding
section.
1. Seat the LCD module in the display assembly with the LCD module bracket and secure it
with six M2x3 black screws. Note the L and R markings to make sure that the bracket arms
are secured on the correct side.
2. Seat the LCD module with bracket on the chassis.
3. Secure the LVDS cable with the M2.5x4 screw to the chassis.
To Next Page
Loading...
