2.15 5IN1 Card Troubleshooting 2 Troubleshooting Procedures
Satellite M100 Series Maintenance Manual
[CONFIDENTIAL]
2-42
To determine if the computer’s built-in 3D HDD protection is functioning properly, perform the
following procedures. Figure 2-18 outlines the process. Start with Procedure 1 and continue as
instructed.
Procedure 1: Diagnostic test
Procedure 1 Diagnostic test
Run the Diagnostic Program, which will automatically execute the 3D sensor test. Refer to
Chapter 3, Tests and Diagnostics for more information on the program.
If an error is not located, the 3D HDD protection system is functioning properly.
To Next Page
Loading...
