Toshiba Strata CIX40 - Page 47

CIX40 Installation
CIX40 Default Initialized Data
Strata CIX40 Installation & Maintenance 5/06 1-41
Note To log into GVPH1 boxes for the first time, enter the default telephone station number plus
997. Example: for Station 200, enter 200997 as the Voice Mail ID.
Table 1-26 Prog 200 Default Data for GCDU2
GCDU2 GSTU1
FB0 DN 209 210 211 212 213 214 215 216 217
FB1 EQUIP 010701 010702 010703 010704 010705 010706 010707 010708 010402
FB2 DKT DKT DKT DKT DKT DKT DKT DKT SLT
FB3 Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext. Ext.
FB19 VM ID 209 210 211 212 213 214 215 216 217
FB22
VM MW
Center
Port
250 250 250 250 250 250 250 250 250
FB35
Station
Speed
Dial Bins
10 10 10 10 10 10 10 10 10
Table 1-27 Prog 200 Default Data for GVPH1
GVPH1
FB0 DN 220 221 222 223
FB1 EQUIP 010501 010502 010503 010504
FB2 SLT SLT SLT SLT
FB3 Voice Mail Voice Mail Voice Mail Voice Mail
FB19 VM ID
FB22
VM MW
Center
Port
Leave blank Leave blank Leave blank Leave blank
Table 1-28 Prog 579 Default Data
FB04 Output of Class, ANI and DNIS 1 (Enable)
FB05 Calling Number Digits Sent to VM 10
Same as CIX100
Do NOT change for GVPH1
FB16 VMDN (Distributed Hunt Group Pilot) 250 Measage Center Call-back
FB19 SMDI ANI / CLID Digit Length 10
Same as CIX100
Do NOT change for GVPH1
Table 1-29 Prog 580 – Voice Mail Data Assignment Default Data for GVPH1
FB0 DN 220 221 222 223
FB1 INBAND / SMDI SMDI SMDI SMDI SMDI
Note: In Program 209, the above Voice Mail ports are assigned to (distributed) Hunt Group 01.
D. H. Pilot DN 250