4.5 HDD 4 Replacement Procedures
4.5 HDD
Removing the HDD
The following describes the procedure for removing the HDD. (See Figure 4-6 to 4-8.)
CAUTION: Take care not to press on the top or bottom of the HDD. Pressure may cause
data loss or damage to the HDD.
1. Remove the following screws and HDD slot cover.
• M2.5×16B FLAT HEAD screw ×1
• M2.5×8B FLAT HEAD screw ×1
HDD slot cover
M2.5×16B FLAT HEAD
M2.5×8B FLAT HEAD
Figure 4-6 Removing the HDD slot cover
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-15
To Next Page
Loading...
