Toshiba Tecra M9 - Smart Card Unit

4 Replacement Procedures 4.15 Smart Card unit
4.15 Smart Card unit
Removing the Smart Card unit
The following describes the procedure for removing the Smar Card unit. (See Figure 4-SC5.)
1. Push the hook in a cover assembly and slide the Smart Card unit in the direction in
the figure below to remove it.
Smart Card unit
Guide
Hook
Figure 4-SC5 Removing the SmartCard unit
Installing the SmartCard unit
The following describes the procedure for removing the SmartCard unit. (See Figure 4-SC5.)
1. Insert the SmartCard unit into the guides of the cover assembly until the hook is
engaged.
4-50 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)