Toshiba Tecra M9 - PC Card;Sd Card

4 Replacement Procedures 4.3 PC card/SD card /Smart Card
4.3 PC card/SD card /Smart Card
4.3.1 PC Card
Removing the PC card
The following describes the procedure for removing the PC card. (See Figure 4-2.)
NOTE: Insert or remove the PC card in accordance with any instructions in the PC card
manual or the manuals of this computer.
1. Turn the computer upside down.
2. Push the eject button. It will pop out. Then press the eject button again to eject the
PC card.
3. Grasp the PC card and remove it.
4. Push the eject button until it is locked.
Eject button
PC card
Figure 4-2 Removing the PC card
Installing the PC card
The following describes the procedure for installing the PC card. (See Figure 4-2.)
1. Make sure the eject button does not stick out.
2. Insert the PC card carefully and make sure a firm connection.
4-10 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)