Toshiba Tecra M9 - Replacing the 14.1-Inch WXGA Samsung Fluorescent Lamp

4 Replacement Procedures 4.29 Fluorescent Lamp
4.29.2 Replacing the 14.1-inch WXGA Samsung Fluorescent Lamp
To replace the 14.1-inch WXGA Samsung fluorescent lamp, follow the steps below and refer
to figures 4-60 to 4-63.
Removing the fluorescent lamp
1. Remove the PCB cover.
CAUTION: Handle with care not to damage COF of S/D ICs.
PCB cover
Figure 4-60 Replacing Samsung fluorescent lamp (WXGA) (1)
4-100 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)