4.29 Fluorescent Lamp 4 Replacement Procedures
2. Remove the side tapes and Al tape.
Lamp-wire tape
Bottom Al tape
Side tape (left)
Side tape (right)
Figure 4-61 Replacing Samsung fluorescent lamp (WXGA) (2)
3. Separate the top chassis from the molded frame.
CAUTION: Separate in the order of bottom hook and side hook (left and right).
Figure 4-62 Replacing Samsung fluorescent lamp (WXGA) (3)
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-101
To Next Page
Loading...
