4.3 PC card/SD card /Smart Card 4 Replacement Procedures
4.3.2 SD card
Removing the SD card
The following describes the procedure for removing the SD card. (See Figure 4-3.)
NOTE: Insert or remove the SD card in accordance with any instructions in the SD card
manual or the manuals of the computer system you are using.
1. Push the SD card. It will pop out partly, so pull out the card.
SD card
Figure 4-3 Removing the SD card
Installing the SD card
The following describes the procedure for installing the SD card. (See Figure 4-3.)
1. Insert the SD card and press it until it securely connected.
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-11
To Next Page
Loading...
