4 Replacement Procedures 4.3 PC card/SD card /Smart Card
4.3.3 Smart card (Smart Card model only)
Removing the Smart card
The following describes the procedure for removing the SmartCard. (See Figure 4-SC1.)
CAUTION: Before you remove the SmartCard, refer to the Card’s documentation and to
your operating system documentation for proper procedures and
precautions.
1. Hold both sides of the SmartCard and remove it out horizontally.
SmartCard
Figure 4-SC1 Removing the SmartCard
Installing the SmartCard
The following describes the procedure for installing the SmartCard. (See Figure 4-4.)
1. Insert the SmartCard into the slot horizontally.
4-12 [CONFIDENTIAL] TECRA M9 Maintenance Manual (960-631)
To Next Page
Loading...
