4.5 HDD 4 Replacement Procedures
3. Place the HDD assembly on a flat surface and remove the following screws fixing the
HDD holder.
• M3×4C FLAT HEAD screw ×4
4. Separate the HDD holder and HDD.
M3x4C FLAT HEAD
M3x4C FLAT HEAD
HDD holder
(HDD frame and tab)
HDD
M3x4C FLAT HEAD
Figure 4-8 Removing the HDD
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-17
To Next Page
Loading...
