4.24 LCD unit/FL inverter 4 Replacement Procedures
8. Remove two glass tapes securing the LCD cable and disconnect the LCD cable from
the connector on the LCD unit.
LCD cable
Glass tape
Figure 4-44 Removing the LCD cable
9. Remove the following screws and LCD unit.
• M2×3C S-THIN HEAD screw ×4
M2×3C S-THIN HEAD
M2×3C S-THIN HEAD
LDC unit
Figure 4-45 Removing the LCD unit
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-75
To Next Page
Loading...
