4.24 LCD unit/FL inverter 4 Replacement Procedures
4.24.3 nstalling the LCD unit/FL inverter (3G model)
The following describes the procedure for installing the LCD unit/FL inverter. (See Figure 4-
40 to 4-44.)
NOTE: When Replacing the LCD unit of 3G model with a new one, stick new aluminum
sheet and ferrite sheet in place as shown below.
There are four sheets as shown below, use correct sheets.
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-77
To Next Page
Loading...
