4.26 Wireless LAN antenna/Bluetooth antenna/3G antenna 4 Replacement Procedures
NOTE: When replacing the LCD cover 10C WXGA model with a new one, stick a new
cushion in place.
Cushion
Installing the Wireless LAN antenna/Bluetooth antenna
The following describes the procedure for installing the wireless LAN antenna/Bluetooth
antenna. (See Figure 4-46.)
1. Install the wireless LAN antennas and Bluetooth antenna to the display cover.
2. Arrange the wireless LAN antenna cables and Bluetooth antenna cable on the
display rear cover and secure it with the acetate tapes.
TECRA M9 Maintenance Manual (960-631) [CONFIDENTIAL] 4-83
To Next Page
Loading...
