Toshiba TH650A-IP - Air Pipes Used for Tools of the Robot

STE 80747
– 32 –
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
4.2 Air Pipes Used for Tools of the Robot
The Model TH650A robot comes with three (3) air line pipes necessary for tools.
The outer diameter of the air pipes is 6 mm. Fig. 4.4 shows the air pipe.
The user shall prepare solenoid valves and air control unit.
The air tube is identified by the number and color. Make piping in the correct manner
with reference to the following figure.
1 : Red 2 : White 3 : Blue
Wiring panel
Details of wiring panel
3x
φ
6 air tube
L type quick joint
Quick joint
1
2
3
3
2
1
3xM5 hand-operated air joint
3x
φ
6 hand-operated quick joint
Details