STE 80747
– 36 –
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Fig. 5.2 Lower bellow
!
CAUTION
• DO NOT pull the bellow by force when removing it. If it is not be done
completely, the bellows may be broken.
• Be sure to apply Loctite adhesive to the attachment bolts. If you neglect the
instruction, the dust-proof and drip-proof performance will be impaired
resulting in ingress of water and dust.
• Be careful not to forget to attach gaskets. If it is not be done, the dust-proof
and drip-proof performance will be impaired resulting in ingress of water and
dust.
Tool flange
Gasket (attached to
inside of bellow)
Retainer (upper)
Gasket
Bellow
Retainer (lower)
Apply liquid gasket to
the portion (indicated
by arrow) before
attaching the bellow.
Apply liquid gasket to the
portion (indicated by arrow)
before reattaching the gasket.
3) Replace the bellow with a new one in
the reverse order of the removal
procedures. Be careful not to forget to
attach a gasket. Apply Loctite
adhesive to all attachment bolts.
To Next Page
Loading...
