STE 80747
– 38 –
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
5) Replace the bellow with a new one in the reverse order
of the removal procedures. Be careful not to forget to
attach gaskets. Apply Loctite adhesive to all attachment
bolts.
Fig. 5.3 Upper bellow
Cap
Bellow
Lower retainer
Gasket (adhering
to the bearing
case)
Bearing case
Collar
Not provided for
Z200
Provided for
Z370
Bellow shaft
Setscrew
Upper retainer
Setscrew
Wire guide
Gasket (adhering
to the retainer)
Arm 2 cover
Gasket (adhering to
the bellow
attachment ring;
removal not
needed)
Bellow attachment
ring (removal not
needed)
Apply liquid gasket to the
portion (indicated by arrow)
before attaching the gasket.
pply liquid gasket to
the portion (indicated
by arrow) before
attaching the bellow.
To Next Page
Loading...
