STE 80747
– 6 –
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
This manual is comprised of the following seven (7) sections:
Section 1 Specifications
This section describes the basic specifications and names of respective parts
for the dust-proof and drip-proof type industrial robot.
Section 2 Transportation
This section describes how to remove the dust-proof and drip-proof type robot
from its box and how to transport it to the installation site. This section also
deals with the precautions to be taken when the robot is to be stored
temporarily after unpacked.
Section 3 Installation
This section discusses the dust-proof and drip-proof type robot installation
environment, space requirements, and how to install the robot.
Section 4 Tool Interface
This section discusses how to connect the cables and pipelines for the tool of
the dust-proof and drip-proof type robot.
Section 5 Maintenance
This section describes the structure of the dust-proof and drip-proof type robot
and all items required for the maintenance and inspection of the same robot.
Section 6 Cleaning of Robot Body
This section describes the precautions to be taken when the robot body is to
be cleaned and washed.
Section 7 Maintenance and Replacement Parts
This section explains the maintenance and replacement parts.
To Next Page
Loading...
