Toshiba TOSVERT-130G2+ User Manual

October, 1994
Part #34470
HIGH PERFORMANCE TRANSISTOR INVERTER
IGBT DIGITAL SERIES
OPERATION MANUAL
TOSVERT-130G2+

Toshiba TOSVERT-130G2+ Specifications

General

Series	TOSVERT-130G2+
Category	Inverter
Input Frequency	50/60 Hz
Enclosure Rating	IP20
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10°C to +50°C
Altitude	1000m
Cooling Method	Fan Cooled
Humidity	95% RH or less (non-condensing)

Summary

General Safety Instructions

Safety in Installation and Operation

Installation Precautions

Ensures proper and safe setup of the inverter in its operating environment.

Operating Precautions

Critical guidelines for safe and effective operation of the inverter.

Wiring, PWB Layout, Jumpers, and Terminal Connections

Simple Connection Diagrams

Illustrates basic wiring configurations for connecting the inverter.

Functions

Operating Panel

Overview of the inverter's control panel, keys, and display functions.

Function Access/Set - Status Keys

Details how to access and set functions using keypad keys and monitor status.

Basic Operations

Simple Operation

Frequency Setting (FC)

Operating Procedures

Starting/Stopping - Panel Control

Procedures for starting and stopping the inverter using the control panel.

Operating Precautions

Confirmation of Wiring

Start-Up and Test

Selection of Main Circuit Wiring Equipment and Standard Cable Sizes

Grounding

Control/Driver Board Terminal Block Details

Terminal Connections and Functions

Basic Operating Keys

Function Access/Set - Status Keys

First and Second Functions Factory Setting Overview

First Function Parameters

Second Function Parameters

Function Access/Set Methods

First Functions

Second Functions

Frequency Setting (FC)

Status Monitoring

Normal Status Monitoring

Tripped Status Monitoring

Fault Codes

List of fault codes and their corresponding causes for inverter trips.

Input Terminal Status Code

Output Terminal Status Codes

Monitoring Details of Faults

Starting/Stopping - Panel Control

FORWARD/REVERSE

Setting the motor rotation direction and checking its correctness.

Coast to Stop

Emergency Stop

Starting/Stopping-Remote Control

Frequency Setting - Panel Control

Jog

7 Preset Speeds

Pattern Run

Output Signals

Selectable Outputs

Fault-Detection Output Terminals

Resetting After a Trip

Operating Functions - Descriptions and Examples

FIRST FUNCTIONS

Operating Functions - Descriptions and Examples (Cont'd)

SECOND FUNCTIONS

Auto Reset Conditions