TOSHIBA
5.1 Function Settings and Status Monitoring (Cont'd)
V/F Characteristics of the Standard Setting Mode
"tYP=1"
General purpose
50Hz setting
100%
3%
Output
voltage
0
50Hz
Output frequency
"tYP=2"
General purpose
60Hz setting
100%
3%
Output
voltage
0
60Hz
Output frequency
"tYP=3"
Standard setting
upon shipment
100%
3%
Output
voltage
0
60
Output frequency
80Hz
KEY ACTION DISPLAY
Assume the inverter is in the monitor mode and not
running.
The inverter is now in the function mode and
has accessed Function #0.
Displays the value currently set for "tYP". When reading
this function and only this function the value displayed
will always be zero.
Resets all 96 built-in functions back to factory settings.
Used in cases where starting over is easier than
searching for misadjusted functions.
READ
MON
3
WRT
5 - 2
:
5.2 "96" Built-in Functions for Complete Operating Control
The G2+ inverters have a wide variety of operating functions with each function having
a wide adjustment range. To the user, this means that almost any application can be
controlled to produce maximum output at minimum cost. For ease of programming,
functions are classified into first and second functions. See the Factory Overview
Chart on page 6-7 for a complete list of the Built-in Functions.
To Next Page
Loading...
Need help?
General