Tosibox Lock 500 User Manual

31
TABLE OF CONTENTS
An activation code will be generated, send it over to the end user 2.
who shall activate and use the SoftKey client
On client computer: activate SoftKey: Make sure TOSIBOX3.
®
Key
software v3.0.0 or later is installed on the PC. Start the software.
Activate the SoftKey by choosing Devices > Activate SoftKey and
entering the received activation code
On Master Key: Confirm SoftKey. Confirm the activation from the 4.
pop-up dialog.
Define access rights for the new SoftKey by following the wizard5.
The SoftKey is now ready to be used and can connect to the Locks
where access was granted in step 5.

Tosibox Lock 500 Specifications

General

Brand	Tosibox
Model	Lock 500
Category	IP Access Controllers
Language	English