Toyota 2012 Auris - Bluetooth SETTINGS; Bluetooth FUNCTION ON;OFF

127
1. SETUP OPERATION
5
SETUP
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
4. Bluetooth
®
SETTINGS
1 Display the “Setup” screen. (P.120)
2 Select “Bluetooth*”.
3 The following screen will be displayed.
1 Display the Bluetooth
®
settings
screen. (P.127)
2 Select “Bluetooth*”.
When “Bluetooth*” is on:
Vehicles with a smart entry & start sys-
tem
The Bluetooth
®
device is automatically
connected when the power <engine>
switch is turned to ACCESSORY or ON
<IGNITION ON> mode.
Vehicles without a smart entry & start
system
The Bluetooth
®
device is automatically
connected when the engine switch is
turned to the “ACC” or “ON” position.
When “Bluetooth*” is off:
The Bluetooth
®
device is disconnected,
and the system will not connect to it next
time.
 Even if the Bluetooth
®
function is set to
off, it will turn on automatically when a
phone or other Bluetooth
®
device is con-
nected.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Function Page
Bluetooth
®
function on/off 127
Pairing a Bluetooth
®
device 128
Paired device list 133
Editing the system name 134
Setting PIN 134
Bluetooth
®
FUNCTION ON/
OFF