Toyota 2012 Auris - When You Release Your Car; CONNECTING a Bluetooth PHONE

84
1. BASIC INFORMATION BEFORE OPERATION
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
 You can initialize the following data in the
system.
• Phone book data
• Call history data
• Volume setting
• Bluetooth
®
setting
• All telephone settings
• Short message template
1 Press the button.
WHEN YOU RELEASE YOUR
CAR
A lot of personal data is registered
when you use the Hands-free system.
When you release your car, initialize
your data. (P.124)
INFORMATION
 Once the data is initialized, all personal
data will be erased. Pay due care when
initializing the data.
CONNECTING A Bluetooth
®
PHONE
In order to use the hands-free system,
it is necessary to pair the phone and
connect the phone’s profile (HFP) with
the system.
Once the profile has been connected,
hands-free calls can be made.
If you have not yet connected any
Bluetooth
®
phones with phone profile
(HFP), you must first connect your
phone with phone profile (HFP)
according to the following procedure.
Connect your Bluetooth
®
phone with
phone profile (HFP) after bringing the
vehicle to a complete stop.