231
6. NAVIGATION SETTING
7
NAVIGATION SYSTEM
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
3. TRAFFIC MESSAGE SETTINGS
1 Display the “Navigation” menu screen
and select “Traffic messages”.
(P.176)
2 Select the “Settings” tab.
3 Select the desired item.
1 Display the “Settings” screen.
(P.231)
2 Select “Dynamic reroute”.
3 Select the desired item.
TRAFFIC MESSAGE
SETTINGS
No. Function Page
Select to set the reroute
method.
231
Select to turn off traffic
messages.
Select to receive traffic in-
formation via the TMC ra-
dio station.
232
Select to receive traffic in-
formation via the internet.
233
SETTING REROUTE METHOD
No. Function
Select to disable receiving traffic
messages and no reroute will be cal-
culated.
Select to enable relevant traffic
messages on the route to be dis-
played as a pop-up window and ac-
tivate automatic reroute calculation.
Select to enable relevant traffic
messages on the route to be dis-
played as a pop-up window but dis-
able automatic reroute calculation.
The user decides if reroute calcula-
tion is desirable or not.