Toyota 2012 Auris - PAIRING a Bluetooth DEVICE

128
1. SETUP OPERATION
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
1 Display the Bluetooth
®
settings
screen. (P.127)
2 Select “Add new device”.
When another Bluetooth
®
device is con-
nected
 To disconnect the Bluetooth
®
device,
select “YES”.
When 4 Bluetooth
®
devices have al-
ready been paired
 A paired device needs to be replaced.
Select “OK”, and select the device to be
replaced.
3 When this screen is displayed, search
the screen for the device name of your
Bluetooth
®
device.
 To cancel the registration, select
“Cancel”.
4 Pairing the Bluetooth
®
device using
your Bluetooth
®
device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device being con-
nected a message confirming registration
may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confir-
mation message.
PAIRING A Bluetooth
®
DEVICE
Up to 4 Bluetooth
®
devices can be
paired. A paired device can be con-
nected to any of its supported profiles
such as phone (HFP), music (A2DP).
ADDING A NEW DEVICE