Toyota 2012 Auris - Searching by Coordinates; Searching on the Map

199
3. DESTINATION SEARCH
7
NAVIGATION SYSTEM
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
1 Display the “Navigation” menu screen
and select “Enter destination”.
(P.176)
2 Select the “Advanced” tab.
3 Select “Select point on map”.
4 Select the desired point on the map.
5 Select “Go”.
 The route will be calculated.
1 Display the “Navigation” menu screen
and select “Enter destination”.
(P.176)
2 Select the “Advanced” tab.
3 Select “Enter geo-coordinates”.
4 Select “N” or “S”.
5 Enter the latitude.
6 Select “W” or “E”.
7 Enter the longitude.
8 Select “OK”.
SEARCHING ON THE MAP
 When “Save” is selected, the point is
registered in the “Stored” list on the “My
destinations” screen. (P.218)
SEARCHING BY
COORDINATES
Geo coordinates can be entered in
DMS format (Degrees, Minutes’, Sec-
onds”). Only coordinate values that
can potentially exist are able to be en-
tered. Impossible coordinate values
and their relevant screen buttons will
be dimmed.