Toyota 2012 Auris - Page 198

198
3. DESTINATION SEARCH
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
SEARCHING BY NAME
1 Select “By name”.
2 Select the desired area to search.
(P.197)
3 Enter POI name and then select “OK”.
4 Follow the steps “SEARCHING BY
CATEGORY” from “STEP 5”.
(P.197)
SEARCHING BY MAP
1 Select “By map”.
2 Select the desired POI icon on the
map.
3 Follow the steps “SEARCHING BY
CATEGORY” from “STEP 5”.
(P.197)
INFORMATION
 Search areas are available as follows.
Search by “At current position”, “At
destination” or a town name:
Search radius is 50km (30 miles).
Search by “Along route”:
Search area is within 500m (0.3 miles)
on both sides of the route.
 The POI search result list is sorted by
the distance to the POI from the follow-
ing points.
Search by “At current position” or
“Along route”:
The distance will be calculated from the
current position to the POI.
Search by “At destination”: The dis-
tance will be calculated from the desti-
nation to the POI.
Search by a town name: The distance
will be calculated from town centre to the
POI.
INFORMATION
 Depending on the current map scale,
not all POI icons will be available for
selection.