137
1. SETUP OPERATION
5
SETUP
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
PAIRING FROM THE SYSTEM
1 Select “Search devices”.
When another Bluetooth
®
device is con-
nected
To disconnect the Bluetooth
®
device,
select “YES”.
When 4 Bluetooth
®
devices have al-
ready been paired
A paired device needs to be replaced.
Select “OK”, and select the device to be
replaced.
2 Select the desired device.
Connectable Bluetooth
®
devices will be
displayed in the list.
3 Confirm the PIN.
A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device being con-
nected a message confirming registration
may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confir-
mation message.
4 Check that the following screen is dis-
played.
The system waits for connection requests
coming from the paired device. All
requested profiles are connected automat-
ically.
Internet profile is not connected automati-
cally. For details on connecting internet
profile. (P.139)
PAIRING A Bluetooth
®
DEVICE
Up to 4 Bluetooth
®
devices can be
paired. A paired device can be con-
nected to any of its supported profiles
such as phone (HFP), music (A2DP)
and/or internet (DUN/PAN).
To Next Page
Loading...
